Introduction6
지문 분석결과
fico가 지문 학습에 필요한 것들을 구성하여 학습 효율성을 제공해 드립니다.
노트나 질문을 통해 자신만의 지문 노트를 만들어 관리해 보세요.
노트나 질문을 통해 자신만의 지문 노트를 만들어 관리해 보세요.
The effect of processing parameters and material properties on residual forces induced in LPBF
The effect of processing parameters and material properties on residual forces induced in LPBF
The effect of processing parameters and material properties on residual forces induced in LPBF
지문 전체 문장
문장을 클릭하면 해당 문장의 구문 분석 내용을 보여줍니다.
Introduction6
Similar results were obtained by Zaeh and Branner [26] who used the cantilever method and neutron diffraction to conclude that the use of island scanning was preferable to long scanning vectors. However, Ali et al. [15] determined that using full-length vectors (from side to side of the part) with a 90 alternating scan strategy resulted in the lowest levels of residual stress. In a different study, Robinson et.al [27] found that using single scan vectors only in the Y direction reduced the developed residual stresses and deflection compared to using a Chessboard scan strategy. Additionally, they found that increasing the square size in the Chessboard scan strategy in the range from 2.5 mm to 20 mm reduced the level of residual stress. Similarly, Cheng et al. [28] based on a finite element analysis concluded that full-length line vectors with 45 inclined scanning generated the lowest residual stresses and part deformation compared to the other scan strategies they tested.
fico 문장 분석
지문에 사용된 특정 문장에 대한 궁금증은 해당 문장의 헬프fico쌤에 등록하는 것이 좋습니다.